Making Sense of Electrical PPE

  • Post comments:2 Comments

From time to time we receive questions/comments on published articles. One such case is an email from a “concerned worker” in reference to an article posted on the OH&S website in 2011 regarding the importance of PPE and it’s proper usage.

I wanted to thank you for your article from 2011. You mentioned in your article that its best to use class 0 1000volt instead class 00 500volt gloves for 480 volt systems because 480 ofter exceed that. I have had to convince some people why I chose class 0 over the class 00 for 480. It was believe the voltage listed on the glove was only for nominal, and not actual voltage. I actually had to explain the difference in the 2 and that the gloves are based on the actual voltage a person will be exposed to and not just the nominal design of the system. Wish I could find more info in writing to show this to people.

From a shock perspective Class O vs. OO is little difference. Sometimes you could have overvoltage and surpass the 500V but you are right it is nominal voltage. Most choose Class O for two reasons: Class O is thicker so they last longer.
Class O is better in arc flash because of that thickness. If you are working 120V-240V Class OO is fine. On 480V I recommend Class O. And Black or Blue are the most protective color for arc flash in research so far.

We cover this very issue in our NFPA 70E class. We are happy to answer similar questions about electrical safety and related issues.

Hugh Hoagland

does research and testing of PPE exposed to electrical arcs and is an arc flash expert. Hugh is a Sr. Consultant at ArcWear and Sr. Partner at e-Hazard. Read more about Hugh.

This Post Has 2 Comments

  1. Avatar

    Hello Hugh! I think I recognize that email. 😉 Interesting convo, I wonder what makes Black and Blue better colors in arc flash? Maybe we should all start wearing black shirts and jeans? 😉

    1. Hugh Hoagland
      Hugh Hoagland

      This is true in gloves because the “black” colorant is carbon black. In jeans, black is just lots of navy blue dye. The colorants which are dyes are different than carbon black. The only issue with rubber gloves is WHEN they ignite which is only known for two manufacturers. For >Class 2 this is quite high in the black color. In other colors it is as low as 20 cal/cm2.

Leave a Reply